Mix together 5 parts oil of rhodium and 2 parts oil of cumin.
Add 1 part tincture of musk. Stir.
Pour into 1/2 oz. bottles and label.
Put 1 or 2 drops of fish bait to attract fish.
Mix together 2 oz. oil of rhodium, 1/2 oz. tincture of musk, 1 oz. oil of cumin, 1/2 oz. juice of loveageroot.
Make a paste of bread crumbs mixed with shreds of cotton or wool. Pour the oil mixture on top of it and mix well.
Keep in tightly sealed bottles.
Break off a small piece of the cotton/wool mixture and use for bait.
Mix together 1 lb. ground aniseed or fennel seed and 1/4 lb. ground allspice.
Sprinkle 1/8 oz. oil of cloves over the above and mix.
Store in tightly sealed jars for a few days while the odors blend.
Put a drop on fish bait.
Combine 1 oz. gum benzoin and 12 oz. olive oil in a double boiler. Heat for 2 hours.
Remove and let stand for a week. Then strain.
Add 30 drops oil of rhodium and 3 drops oil of patchouli. Use a medicine dropper.
Add 1 1/2 oz. bacon grease or lard oil.
Store this mixture in small bottles. Put 1 or 2 drops on meat bait.
Combine 1/2 oz. oil of rhodium, 1/8 oz. oil of spearmint, 1/2 oz. oil of anise and 1 oz. glycerin.
Use 2 drops on any bait.
Combine pure cod liver oil with some red oil-soluble food coloring. Mix.
Dip any bait into the mixture.
Put a loosely-covered jar of dead worms in a garage, barn or outbuilding.
Wait 10 days or until they have turned to liquid.
Pour off 1/2 oz. of the liquid and mix 20 drops of oil of rhodium with it.
Put a drop or 2 on fish bait.
Take odd pieces of cut-up fish, clams, lead minnows, crawfish and eels and put into a loosely-covered glass jar.
Leave until it turns to oil.
Mix 1 part oil of anise with 5 parts of the fish oil.
Use on fish bait. Especially attracts bottom feeding fish.
Combine 2 oz. cod liver oil with 20 drops oil of anise. Mix well.
Use on bait. Especially attracts trout.
Combine 1/2 oz. oil of rhodium and 1/2 pint olive oil.
Put a drop or two on fish bait.
To do this you must place the glass under water completely, then with a pair of ordinary scissors, proceed to cut the glass as you would paper or cloth. This method is, of course, not as smooth as job as the methods described above.
In order to prepare a foam of given density, thoroughly mix Polylite 8601 with the necessary amount of Catalyst R1 and water.
This is the age of plastics! One of the most amazing developments in this age of wonders . . . NEW developments and discoveries are constantly being made in the plastic field. Here is a truly rich field for experimentation.
Almost everyone has a box of sparkling old buttons from Grandma's sewing chest to marvel at, or set of dominoes, checkers or mah-jongg pieces rescued from a flea market.
This new mold material is much superior to ordinary gelatin (mold glue) and is very easily made. It does not shrink or dry out like ordinary casting gelatins.
This product is a small plastic vial with screw cap, in which a piece of chemically saturated folded felt is packed.
Use 15 gallon plastic garbage can with clip on lid. You need:
This plastic is particularly adaptable for making molds and light castings requiring tensile strength but very clear outline. It may also be used for making ornaments and novelties. However, as this is flammable, do not use for ashtrays.
If you enjoy sitting around your fireplace and watching colorful flames dance, you'll be happy to know you can color your own flames quite cheaply. Basically, there are three methods of coloring fireplace flames.
Nitrate of Silver (pure) . . . . . . . . 40 grains Nitrate of Silver (pure) . . . . . . . . 32 grains Distilled Water . . . . . . . . . . . . 1 pint Ammonia, 26% . . . . . . . . . . . . . . To be used as directed.